Summary

In the dark take out the film.Pull the flat end off.Take off film by pelling off the tape.Put the film into a plastic film reel. Slide one end into one of the slots and put it in until it is loaded. But you are going to be in the dark so you have to practice in the light. Until you finally get so you will be ready to do it in the dark. Then place the loaded reel into the tank. Now you can turn on the light because the film will not be exposed to the light. Get all of the chemical in front of you. You need the film developer,a stop bath,a fixer with hardner, and hypo eliminator bath. Have to make sure the temputure is being controlled. most of it will be on 65 and 75 degrees. Do not open the tank because we need to keep the chemicals fresh. Pour water into it for one minute. And let the film rinse off for 30 seconds. Now use the fixer with hardner for 5-10 minutes and you should begin to see the negatives. just put the film into cold water for 5 minutes
`


Reticulation: a reticulated formation, arrangement, or appearance; network

Stop Bath: an acid bath or rinse for stopping the action of a developer before fixing a negative or print.

Agitate: to move or force into violent, irregular action